A failed upload uses up to 20 times the power of a successful upload. This is because a failed upload scans the bands for 3 minutes (registration timeout), ...

Scheduled uploads allows heartbeats to be sent at up to 6 specific times during the day. Without scheduled uploads enabled, heartbeats are just sent on a p...

In certain stationary use cases, like temperature sensing using Bluetooth probes or tip detection, location updates may not be required. Clients can save m...

Recovery mode can be used to help recover a stolen asset.  When set, a device reports more frequently, and begins 'live tracking' when on the mov...

Tip Detection detection and Rotation Counting are supported by the Oyster Edge.  The tip event is useful for detecting the emptying of containers such as ...

The Oyster Edge starts/ends trips based on accelerometer activity.   Generally the defaults work well but we can adjust the accelerometer thresholds (inten...

Unlike our Remora battery powered tracker, the Oyster Edge does not have the magnetic tamper detection feature - where an alert is set out when a magnet det...

The Inactivity Timer is a simple timer that starts when a device ends it's trip. Once the configured time period has elapsed, a specified digital input...

Run hours is the total number of hours that an asset has been operating. On hard wired devices, this task is achieved by wiring the ignition line on the dev...

The Oyster Edge can track based on the following modes Movement Based - based on accelerometer activity Periodic Mode - update on an interval Once the ...