Support Home Portal Log in

Getting Started

Introducing the Oyster Edge
The Oyster Egde is an ultra-rugged, Indoor/Outdoor battery-powered asset tracking device and Bluetooth® Gateway. It features cloud-based location solving fo...
Wed, 12 Oct, 2022 at 2:38 PM
Initial Provisioning [Oyster Edge]
This guide is intended to assist new users in getting an Oyster Edge online for the first time. Once you have some experience with the device, this process ...
Tue, 3 May, 2022 at 9:20 AM
Oyster Edge - Sealing the Device
The Oyster Edge has an IP68 and IK07 rated housing. The device must be sealed carefully to achieve the IP68 rating. Ensure that the clear silicon seal is i...
Wed, 12 Oct, 2022 at 3:26 PM
Oyster Edge - Mounting and Installation
The Oyster Edge can be mounted on the asset to be tracked using screws, bolts, cable ties, or industrial adhesives. When choosing a mounting point, you have...
Mon, 14 Nov, 2022 at 10:07 PM
Sim Cards + Data Usage - Oyster Edge
Disclaimer This article is intended to assist partners in selecting between LTE-M/NB-IoT, determining costings, and choosing SIM providers. Advice is gen...
Tue, 3 May, 2022 at 9:30 AM
Default Tracking Parameters [Oyster Edge]
By default, the Oyster Edge is setup for movement-based tracking. The following default settings apply: Update Rate: Out of Trip (stationary): 12 hour he...
Mon, 15 Aug, 2022 at 4:11 PM
Oyster Edge - Tracking Modes
Tracking Modes  1. Movement (Accelerometer) Based - Default In this mode, the device starts/ends trips based on accelerometer movement.  Acceleromet...
Tue, 3 May, 2022 at 8:32 AM
Oyster Edge - Changing the Update Rate
The Oyster Edge has different configurable tracking modes to best fit a variety of applications. Additionally, if an asset is stolen, the unit can be put i...
Tue, 3 May, 2022 at 9:06 AM
Critical Parameters - Oyster Edge
The Oyster Edge is a highly configurable device. Many parameter options are available so that setup can be tailored to suit specific use cases, or enable fe...
Tue, 3 May, 2022 at 8:14 AM
Oyster Edge - Default I/O Mappings
Here are the Default I/O Mappings for Digital Matter's Oyster Edge tracker. You can change some of these mappings on OEM server - we do not recommend c...
Wed, 18 May, 2022 at 2:15 PM