Configuring IOs
The Dart3 has 1 x Ignition Digital Input and 3 x Digital Inputs with configurable pull up/pull down parameters. These inputs detect the voltage at the inp...
Thu, 19 Jan, 2023 at 11:34 PM
A duress button is an example of a "Dry Contact" device. Dry contact is a synonym for 'no voltage'. Since to detect that the push button...
Mon, 21 Nov, 2022 at 11:25 AM
The Dart3 has 3 x Digital Inputs (+1 dedicated Ignition Digital Input). We can use a Digital Input to monitor a secondary bit of equipment on an asset, i.e....
Wed, 20 Jul, 2022 at 2:20 PM
The Dart3 has 2 x different digital output options available. These are: Switched Ground Output Most common and widely used for most applications Pin 1...
Mon, 4 Apr, 2022 at 7:46 PM
The Dart3 can be set to sound buzzers based on various conditions such as: A trip starting, but no driver ID has been scanned - to remind drivers to tag o...
Thu, 1 Sep, 2022 at 10:11 AM
The input monitor allows a digital output to be set, or a buzzer to be sounded, based on the state of device digital inputs, and a speed threshold. Exampl...
Wed, 12 Oct, 2022 at 9:29 PM
The Dart3 has a 0-40V analogue input. The inputs are only accurate to within approx 100mV (0.1V). On the 12-way harness, this is the Orange/White wire, ...
Mon, 12 Dec, 2022 at 5:03 PM
Alerts can be setup to monitor an assets external voltage and to send an alert when the voltage dips below certain level. External Voltage is always report...
Thu, 12 Jan, 2023 at 10:14 AM
The Dart3 can be configured to count pulses on digital inputs - for example to monitor a meter. All 3 Digital Inputs on the Dart3 can be used for Pulse Cou...
Thu, 12 Jan, 2023 at 9:21 AM