The Oyster Edge can track based on the following modes
- Movement Based - based on accelerometer activity
- Periodic Mode - update on an interval
Once the device detects its in motion, it will start logging records and upload based on the below default parameters.
Default Tracking Parameters - [Oyster Edge]
For some applications, it may not be necessary to log or upload during trips. Firmware version 1.8+ provides the ability to disable In-Trip logging and upload.
To disable in trip logging and upload, from Parameters > Movement Detection, and set the below.
The above parameters mean that the device will only upload during the start and end of a trip. It will not log/upload while in trip.