Support Home Portal Log in
Open navigation

Default Tracking Parameters [G120]

Below is how a G120 operates out of the box

  • Stationary - Hourly Heartbeats 
    • The device will log a heartbeat record, connect to the server and refresh its GPS data every 60 minutes.
  • Trip Tracking - Wired and Emulated ignition - The G120 will start a trip if either the 
    • Ignition wire is pulled high, i.e, over 5v is applied to the ignition wire, or
    • Movement is detected >150m of movement from the initial position is required to start a trip.
  • Logging - When the device is in trip, it will turn on it's GPS module and cellular modem and log records based on:
    • Time interval
      • log a record every 60 seconds or;
    • Distance interval
      • when 500m is travelled or;
    • Heading Change
      • when direction is changed by 10° over a long distance (>150m)
      • heading change over short distance can also be configured, but this is disabled by default

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.