Support Home Portal Log in
Open navigation

Telematics Guru Telemetry - Getting Started


Status Flags are represented in the left most 8 bits

Recovery Mode Active
Tamper Alert
External Power Enabled
Shunting power from battery
Connected to GSM
External Power Good
Internal Battery good
Trip Status

Digital Inputs of the device are represented in the remaining 24 bits, Bits 0, 6 and 6 are commonly set across all devices.

I/O Mappings

The Input/output mappings are set for the individual Assets in Edit Asset, inside the Manage Asset menu. If you compare these value to the grid above, you'll see they all line up.

Example Telemetry

If we take a snapshot of a log's telemetry we can decode the state of the Asset. Note: remember that the bit number reads from right to left, starting at 0.

Here we have a 1 or 'ON' status flag for bits '0', '5' and status flags '1', '2', '3', '4'.

0000 1111 0000 0000 0000 0000 0010 0001

Bit 0: Ignition = active
Bit 5: GPS Interference detected
Status Flag 0: Device is 'In Trip'
Status Flag 1: Internal battery is 'Good'
Status Flag 2: External power is 'Good'
Status Flag 3: Connected to GSM network: 'YES'

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.