Support Home Portal Log in
Open navigation

G62 Cellular Firmware Release Notes

  Subscribe To Updates

Subscribe to our technical newsletter to be notified of bug fixes and firmware updates

v2.13 / 3.13
Improved run hour incrementation
v2.12 / 3.12
Reduced the risk of the 4G modem entering an unrecoverable fault state
v2.11 / 3.11
Fix for repeated "Modem turn off failed" issue
v2.10 / 3.10
Added the option to disable the supression of GPS wander for heartbeats
The GPS fix timestamp is now updated for heartbeats
Odometer optimisations
v2.9 / 3.9
Aiding data HTTP fix
v2.8 / 3.8
Verizon upload restrictions eased (no longer 5 minute batches)
v2.7 / 3.7
Added option to poll iButton
Added geofence download async message
Relaxed minimum heartbeat period
The Idle monitor can now monitor accelerometer movement in addition to GPS speed to determine the state (useful for heavy machinery, like excavators, which can be performing work on the spot)
Driver ID can now be used to temporarily disable server initiated immobilisation (useful when out of coverage)
v2.6 / 3.6
Fixed critical bug in 2.5
v2.5 / 3.5
Added third party server version messaging support
Added GPS satellite count and signal strength filter for higher position certainty
Compatibility for networks that don't support ePCO
Geofence support for third party servers
Added oem server whitelisting
v2.4 / 3.4
Added input monitor
Added backup/fallback admin parameters
v2.3 / 3.3
Fixed support for APNs with authentication
New modem maintenance release for 3.x (6 MB download)
Reverted default Telstra APN to blank
v2.1 / 3.1
Added immobiliser with expiry feature via Async message
Enabled modem maintenance release update (6 MB download)
Network Profile support
SARA-R410M-02B 5.08 support
Added geofence downloads
Added inactivity timer
Added odometer and run hours
Support for incremental modem firmware downloads
Added modem firmware update revision 3, for units deployed for 8-12 months
Added modem firmware update revision 2, for units deployed for 4-8 months
Increased modem firmware download timeout, and limited to one install attempt per boot
Set Telstra 4G sims to Cat-M1 only
4G modem firmware updated to SARA-R410M-02B L0. A.02.01
Added temporary workaround for Ublox 4G modem issue. Permanent solution in progress.
Fixed Async Messages occasionally causing disconnects
Fixed SMS reading bug on 2G
Support for SIM stored SMS configuration on 4G.
Fixed driver ID bug
Added driver id reporting
2G support
Support for new board revision
First Release

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.